E3D Titan - Hypercube-S.T.E.V.E. slimline motor mount mods
Description
In Order To Mount The E3D Titan Slimline Motor Some Mods To The Top Linear Bearing Holder Needed To Accommodate The Wiring Connector Https://E3D-Online.Com/Nema17-Slimline-Stepper-Motor There Are 2 Types Of Bearing Holder. 1 With Just A Cut Out For The Motor Connector & 1 With An Additional Cut Out To Accommodate A Bracket I Needed To Attach My Cable Chain. My Bracket Stl Is Included And A Step File For Those Wanting To Adapt It. In Order To Position The Motor, A Spacer For The Stepper Motor Is Required Attached Is A 10Mm Thick Spacer. I Ended Up Needing 11 Mm So I Non-Uniform Scaled It To 110% There Is Also A Bracing Strap For The Belt Clamp Arrangement Which Requires 2 Pcs M3 X 30Mm Allen Bolts 4 Pcs M3 Plain Nut
Statistics
Likes
11
Downloads
0