Prusa i3 Mk2(s) LCD panel Surface Mount

Description

I Wanted To Mount The Lcd Screen From My Prusa Mk2S On The Front Of Its Ikea Lack Enclosure. The Supports (A & B) Replace The Arms That Normally Attach The Lcd Screen To The Front Threaded Rods Of The Printer. There Are Two Angle Brackets That Screw On To The Enclosure'S Front Surface And To The Support Arms. *You Have To Mount The Angle Brackets To The Vertical Surface First.* Use 3Mm Machine Screws To Attach The Angle Brackets To The Support Arms On The Assembled Lcd Enclosure, Then Mark The Outside Boundaries Of The Brackets On Your Mounting Surface. Take The Angle Brackets Off Of The Support Arms, Drill Holes In The Mounting Surface Using The Angle Brackets As A Guide And Mount Them With #4 Button Head Screws. Slide The Assembled Lcd Box With Supports Inside The Angle Brackets And Re-Attach With 3Mm Screws. I Printed Them In Pla Which Seems Adequate, But Abs Or Petg Might Be Better For The Angle Brackets For Added Strength - They Are Only 2Mm Thick.

Statistics

Category

Tags