Steering Pivot Sleeve for Rattler 1/8 Buggy
Description
These Parts Are Meant To Be A Temporary Fix As I Don'T Know If They Are Stronger Than Original Parts. It Replaces This: Https://Hobbyking.Com/En_Us/Steering-Pivot-Sleeve-With-Clutch-H-King-Rattler-1-8-4Wd-Buggy.Html And/Or Https://Hobbyking.Com/En_Us/Steering-Pivot-Sleeve-H-King-Rattler-1-8-4Wd-Buggy.Html It'S A Little Bigger Than Original Part For Obvious Reasons But It Should Fit Without A Problem. I Made First Version With 1:1 Dimensions, But It Broke Too Easy. There Are No Screw Threads Because They Are Not Needed, Your Metal Screws Will Make The Threads For You (I Used Original Screws). Update @ 14.4.2018: There Is Now Another Version Which Has A Little More Room Inside So It Shouldn'T Be Too Hard To Fit The Bearing And Other Stuff Inside. Nothing Else Should Be Different. Added New Part: I Broke The Other Side So I Made Some Small Changes To The Original. It Replaces This: Https://Hobbyking.Com/En_Us/Steering-Pivot-Sleeve-H-King-Rattler-1-8-4Wd-Buggy.Html
Statistics
Likes
5
Downloads
0