Anet A6 Proximity sensor support
Description
This Is My First 3D Object, So Please Be Kind With Me :P I Made Few Changes To The Original Part For The 18Mm Proximity Sensor: - Moved The Ring A Bit Lower Because Otherwise You Cannot Hold It Firmly With The Bolt - Add A T-Bar On The Higher Fan Ring To Hold Cables From The Carrige I Still Have To Print It And Test It.... My Only Concern Is About The Ring Size That Could Interfere With The X-Stop Switch... Print At 0.2Mm Pla Supports Not Needed 30% Fill Hope You Enjoy It
Statistics
Likes
1
Downloads
0