8mm rod holders
Description
Here Are The Rod Holders I Am Using For 8Mm Rod. Its Works Great, But You Have To Take Your Time To Install It Correctly. You Will Need A Caliper To Make Accurated Measurements. Also If You Drill A Little The Base Holes You Will Have A Little Free Movement For Error Correcting. There Are 2 Files: -8Mm Hole Trough Hole -8Mm 15Mm Depth You Can Try Whatever You Want You Will Need To Print: -2 X 8Mm Rod Holders -2 X 8Mm Rod Holders (Mirrored With Your Slicer) For Setup: - I Recommend You To Assemble The Rods, Linear Bearings And Bed First. -Once You Have It, And Your Rods Are Parallel And Centered, Mesure The Exact Distance Between Rods. -Insert The 4 Rods Holders. -Then You Can Use American Tape (Or Whatever) To Temporary Fix The Holders, Take Your Time To Put The Correct Distance Between Rods And Between A Single Rod And Profile Center. -Now You Can Tighten The Screws. -Put Some Grease In The Rods Enjoy!
Statistics
Likes
3
Downloads
0