MTB Handles
Description
New Handles For Your Mtb The Inner Rod Could Be Printed In Stiff Material While The Outer Should Be As Soft As You Can Possibly Print. Myself Merged Them In Cura And Printed Both Inner And Outer As A One Piece In Same Flex Material. This Way You Can Print Both In One Go But Still Have Control Over Their Separate Infills. Inner Rod Should Be Solid And The Outer With 20% Infill Then Repeat For The Handle Made For The Opposite Side Of The Handlebar And Also If You Want To Support Me Making Cool Things For Download, Even The Smallest Tip Would Be Appreciated. Thank You So Much!
Statistics
Likes
63
Downloads
0