InMoov Stand Holder - 33.5 mm hole
Description
This Is My Inmoov Stand Holder. Based On Similar Inmoov Support Stands, This Is Designed To Use A 30-Mm Pole. This Is A One Piece Print. The Hole Slot Is 33.5-Mm To Allow A Bit Of Movement And Printer Tolerance As My Original Printed Attempt Was Too Tight On The Pole. The Pole I Used Was From Ebay [Aluminium Round Tube] Outside Dia X Wall Thickness: 1.1/4" X 16Swg (31.75 X 1.63Mm) Length 1000-Mm Https://Youtu.Be/774Yyubykxg
Statistics
Likes
10
Downloads
0