Light for Prusa /Anet A8 printers
Description
Need Lights For Your Prusa/Anet A8 Printer, But Dont Want To Struggle With Soldering Etc. Then This Could Be The Solution For You! Simpel Mod With An Led Strip Of 10 Mm Width And Approx 35 Mm Long. The Assembly Should Not Be Interfering With The Display, But Might Have To Be Pulled Off When Printing Large Objects. The Tools For Modification * Two Screws And Nuts To Fasten The Side Bars To The Printer * Led Strip Of Approx, 35 Mm Length And 10 Mm Width. * Four Cable Ties Or The Adhesive From The Led * Maybe Some Glue To Connect The Rightside And Leftside Bars Together. Prints Need: * Two Pieces Of The "Base" * One Leftside * One Rightside Material Used: Pla At 200 Deg Celcius Don'T Forget To Tip If You Like The Project, Then More Designs Will Come In The Future. Remember To Share A Picture Of Your Print With The Community And Especially Your Print Setting! If You Have Any Questions Don'T Be Shy To Write In The Comment Section.
Statistics
Likes
8
Downloads
0