AR-10/LR-308 Ejector Pin Removal Tool
Description
This Is A Tool For Removing The Roll Pin That Retains The Ejector Pin In An Ar-10/Lr-308 Bolt. (See Https://Www.Thingiverse.Com/Thing:3270414 For An Ar-15 Remix By [Kombayotch](Https://Www.Thingiverse.Com/Kombayotch).) The Concept Is Roughly Based On The $63 Version Sold By A Large Distributor. Theirs, Of Course, Is Made Of Metal, And Does Both Ar-15 And Ar-10 Bolts. I Thought It Would Be More Fun To Make One, And Since There Wasn'T Already One On Thingiverse, It Would Be A Useful Addition. This Is Configured For Printing With Abs, And Accounts For The Shrinkage Factor. I Chose Abs Because I Already Had It Loaded In The Printer, And I Felt Like Pla Might Be Too Brittle (Perhaps Not, I Haven'T Tried It). The Metal Bits That Are Required Are A 3/8" X 18 Nut, And A 3/8" X 1" X 18 Thumbscrew (Best), Hex-Headed Bolt (Ok), Or Screw (Ick). The Included Cap Goes Over The End Of Screw Threads, And Can Be Affixed With A Dab Of Silicone Adhesive, Although Pretty Much Anything Should Work Well. Holes Are Provided For #6 Sheet Metal Screws, Should There Be A Desire To Attach It To A Piece Of Wood For Additional Stability.
Statistics
Likes
85
Downloads
0