Z-Stop Limit Switch Mount
Description
My Printer (Hictop I3) Came With A Mount For The Z-Axis Endstop Made Out Of Two Acrylic Pieces. Of Course, It Doesn'T Need Adjusted All That Often...But, When It Does, I Found It A Bit Frustrating That It Requires A Wrench Or Needlenose Pliers Awkwardly Jammed Behind The Leadscrew To Hold The Tiny M3 And M2 Nuts While Adjusting. This Is A Printable Replacement With A Few Improvements: * Captive Nuts For Both The Limit Switch Screws And Mounting Screws * Pins That Mate Into The Adjustment Slot For Easier Positioning Without Side-To-Side Movement. * Mount Is One Solid Piece
Statistics
Likes
3
Downloads
0