Prusa i3 MK3 x-ends for RepRap Samuel
Description
These Are The Prusa I3 Mk3 X-Ends, With Changes For The Reprap Samuel. - Parameterized Spacing Between Z-Axis Holes (Set To 30Mm For Samuel) - Parameterized The Lead Nut Holes (Pcd Of 16Mm And Diameter Of 10Mm For Mine) Source: Https://Github.Com/Jvstein/Original-Prusa-I3 **Note**: If You Adjust The Z-Axis Holes, You Will Need To Adjust The 45 Degree Angle Cuts In The `X-End-Idler.Scad` And `X-End-Motor.Scad` Files.
Statistics
Likes
7
Downloads
0