Prop Spacer for 6mm Extended Shaft
Description
Prop Spacer For 28Mm (Stator Measurement) Cobra Motors That Can Be Outfitted With The Optional Extended Shaft By Innov8Tive Designs Pn:C-Bpal-28 (4-Hole). This Pushes Your Prop Back 19Mm. Update 3/30/18: I Added A 5Mm Spacer For Those Looking For A Bit Less Extension. This Spacer Has Been Tested On My Hc44 At High Speeds And Works Wonderfully. Update 3/27/18: After Some Testing I'Ve Concluded That In Order To Use This You Must Ensure That Your Thrust Angle Is 100% Perfect. Any Deviation, Even The Slightest, Will Be Exaggerated By Extending The Prop Rearward. Tuning Is Required In Order To Get The Desired Performance. That Being Said, I Do Not Recommend Usage Of The Spacer In High Speed Applications. Update 3/26/18: Install As Shown In The Pic. Other Configurations With Unbalance The Prop. There Is A Lock Washer In Between The Prop And Nut. Motor > Extended Adapter > Prop Spacer > Supplied Thick Black Washer > Prop > Lock Washer > Lock Nut
Statistics
Likes
5
Downloads
0