CR-10 Bondtech LH Direct Drive Extruder Mount
Description
This Is A Mount For A Left Hand Bondtech Bmg Extruder On A Cr-10 Or Cr-10S Printer. Will Probably Also Work On Cr-100 S4, S5 And Mini Printers And Maybe Some Other Creality Printers. I Printed Out This Design Https://Www.Thingiverse.Com/Thing:2755588 And Realized The Stardard Bondtech Bmg Is A Little Difficult To Use On Cr-10 As The Release Lever Is On The Back Side Of The Extruder And Difficult To Get To. Decided To Purchase A Left Hand Drive Version And Mount It. After A Quick Modification To Get It To Work With Original Mount I Found The Lh Extruder Moved The Hot End About 8Mm Forward. Still Worked But Part Cooling Wasn'T As Good Anymore So I Decided To Make My Own Mount. This Mount Will Only Work With A Left Hand Version Bmg Extruder. The Cooling Duct Will Interfere With The Hot End If You Try To Mount A Normal Bmd Extruder And It Will Not Fit. Offsets For The Bltouch Are -30 In The X And 0 In The Y Update 2018-04-23: Uploaded Version 2 Of This File. Added A Little More Clearance Between Cooling And Hotend ( The Model I Used For The Hotend Was The Old Style And Not The New Style E3D Hotend. The New Style Is A Little Bigger So You Can Mount The Cartridge Style Thermistor). Also Redid The Entire Part Cooling Fan Duct. Fan Duct Is Now Much Cleaner And Also Has A Splitter In It To Force Half Of The Air To The Other Side To Give More Equal Cooling.
Statistics
Likes
36
Downloads
0