Spyda 500 Quadcopter With Customization
Description
First Of All I Am Not The Creator Of This Model. I Just Made Customization For My Self. ####History: **2018/03/20** **--** Maiden Flight, 13 Min Flight Time. ####Flight Videos: **--**Https://Youtu.Be/2Ye-Ok4Xs9G ####What Is Differences Vs The Original? : **--** On The Top And Bottom Body Plate, I Put Holes For Gimbal Mount And Flight Controller Box. **--** On The Top Body And Bottom Body Plate, I Made A Wall For Putting The Battery Inside It. Max Battery Size 147 X 49 X 33Mm, I Used Turnigy 4S 5000Mah 25C-35C Lipo Battery **--** I Added Dji Naza Flight Controller Boxes For Flight Controller, Gps, Pmu And For Led-Usb Connection. **--** I Made A Gimbal For My 2805 Motors, Mount Hole Size 19Mm And Front Hole Size 12Mm. **--** I Found A Hood And Changed The Size For My Frame. **--** Also If You Have A Plan For Using Power Distribution Board, You Can Use Body Bottom Part (Deeper) Over The Original Bottom Body Plate. So You Can Put Board And Cables Inside This 3 Part Of The Body. ####My Electronics: **--** Emax Mt3110 700Kv Motors **--** 11X47 Or 12X45 Propellers **--** Emax 4 In 1 30 Esc **--** Turnight 4S 5000 Mah 25C Or Multistar 4S 5000Mah 10C Lipo **--** Hollow Shaft 2805 Noname Chinese Edition Gimbal Motor ####Tinkercad Project: Https://Www.Tinkercad.Com/Things/Kqglzjer1Vx
Statistics
Likes
24
Downloads
0