X-Axis 10x15 Cable Chain Ends for FLSUN i3 2017
Description
Designed Some Cable Chain Ends For My Modified Flsun I3 C 2017 Printer. I'Ve Installed Sjekkie'S X-Carriage: Https://Www.Thingiverse.Com/Thing:2584375 With A Specially Designed E3D V5 Clamp: Https://Www.Thingiverse.Com/Thing:2818762 To Be Able To Use Macelius'S Long Radial Fan Fang 5015 Parts Cooler And His V5 Compatible Low- Profile Heatsink Fan Shroud. Https://Www.Thingiverse.Com/Thing:2239300 & Https://Www.Thingiverse.Com/Thing:2243045 I Moved The Z-Axis Motors Out By Drilling The Outer Hole Of The Aluminium Motor Mounts To 6Mm And Tapping And Screwing A M6 Bolt Into The Vertical 2020 Extrusions. These Lead Screw Bottom Bearing Holders Are Used: Https://Www.Thingiverse.Com/Thing:2831543 To Be Able To Use A 10X15 Cable Chain (Marked R18) From Ebay I Needed These Special Cable Chain Ends That Will Only Work With The Modified Z-Motor Position. The Exiting Cables Are Hold In Place With A Piece Of 1,85Mm Filament. Preparations Are Made For The Upcoming Z-Axis 10X15 Cable Chain.
Statistics
Likes
14
Downloads
0