LCR T3 Multi-Component Tester Housing V2
Description
I Picked Up A Cheap Lcr T3 Multi-Component Tester On Ebay And Decided To Make A Housing For It. Being The Huge Dummy That I Am, I Designed A Housing Before Thinking About Checking Tingiverse To See If There Already Was One, And Of Course There'S A Few. Welp, Here'S One More! The Battery Holder Gets Double Sided Taped To The Right Side Of The Box, Next To The Board, And Accessible By Removing The Bottom Of The Box. The Bottom Of The Box And The Board Itself Was Designed To Be Held On By 4 M3 Cap Head Machine Screws, However Self Tapping Screws Of The Appropriate Size Should Work Well Too. I Had No Use For The Surface Mount Tester Pads, So I Didn'T Bother To Expose Them, But If Someone Is Interested In My Design With The Pads Exposed, Hit Me Up And I Can Put Up A 2Nd Version. If You Print One, Please Put Up A Make! I'D Love To See Some Pictures!
Statistics
Likes
5
Downloads
0