39mm Motorcycle Fork Mounted Turn Signal
Description
<B>Edited 3/28/2018 </B> <Ul> <Li> Added Both Left And Right Mounts.</Li> <Li> Accounts For Head Tube Angle At 60 Degrees. </Li> <Li> Improved Internal Cable Routing.</Li> <Li> Added Hole To Fasten Turn Signal Mounting Bracket To Fork Mount.</Li> </Ul> The Turn Signal Mount For My Honda Cb700Sc Nighthawk Ripped At The Bolts, So I Decided To Print Out A Replacement. This Part Was Designed To Fit Around A 39Mm Fork, But Will Likely Have To Be Modified To Be Compatible With Other Turn Signals. The Step And Fusion 360 Files Have Been Added To This Part If You Want/Need To Edit The Part To Better Fit Your Bike. The Mount Was Designed To Be Used With M6X25 Socket Head Cap Screws And Corresponding Hex Nuts: Https://Www.Mcmaster.Com/#91292A138/=1C4Ycfu Https://Www.Mcmaster.Com/#91828A251/=1C4Ycpy Link To Bolt And Heat Set Insert Used To Fasten The Aluminum Bar: Https://Www.Mcmaster.Com/#91292A111/=1C64Rnd Https://Www.Mcmaster.Com/#94180A331/=1C64Rtd The Slot In The Part Is Intended To Hold An Aluminum Bar Of Which The Actual Turn Signal Will Be Mounted With A Threaded Hole. Bar Dimensions Can Be Found In Step Or Fusion 360 File.
Statistics
Likes
26
Downloads
0