Wing Wing Z-84 Landing Gear
Description
*New Version Coming Soon With Steerable Nosewheel (Mg90 Servo) + Clearance For 6" Prop* Landing Gear For The Wing Wing Z-84 These Have Been Under Test And Have Held Up Well. Clearance Is For A 5" Prop. Print: (3) Ww_Landing Gear - Strut (2) Ww_Landing Gear - Main_Wheel (1) Ww_Landing Gear - Nose_Wheel Comsables Required: Thick Ca Accelerator Required Hardware: (3) M3 X 16 Bhcs For Axles Optional Hardware: (3) M3 Nuts For Axle Retainers Install Locations: - Main Wheels: Glue The Main Wheel Struts To The Wing Pylons ~45Mm From The Te Of The Wing Using Ca And Accelerator. - Nose Wheel: Cut Slots For Nose Wheel Strut ~50Mm From The Nose Of The Plane. Glue In Place With Ca And Accelerator Notes: Nose Of The Airplane Should Sit High. Positive Angle Of Attack Is Needed For Takeoff.
Statistics
Likes
61
Downloads
0