Replacement Dustboot for X-carve Suckit
Description
I Printed It In Petg @ 40% Infill, Fast Honeycomb Pattern. This Is After I Cracked The Original After Hitting A Clamp. This Is An Approximation Of The Dust Boot Purchased In Feb 2018 For A Stock X-Carve. Shortcomings: I Haven'T Put In Holes For The Dust Hole Insert. I Am Leaving It Off For The Moment As I'M Using Taller Brushes Which Precludes Its Use. I May Revise This Later To Have A Sunken Dust Cover. As You Can See, I Also Made It 1 Piece As I Only Had To Solve My Geometry. Cad Shared On Fusion360 If You Need To Tweak It Https://A360.Co/2Pmxzbf
Statistics
Likes
19
Downloads
0