SSR Enclosure with wire retention loops Solid State Relay
Description
This Is A Safety Enclosure For A Solid State Relay. It Mounts Centered On A 2040, But Absolutely Could Be Mounted On A 2020 Extrusion. Having An Uncovered Relay Is A Potential Hazard, Especially If Being Used For Ac Mains. The Venting Is Designed For A Vertical Mounting, However If You Are Not Overloading The Relay You Shouldn'T Have Issues Mounting This In Any Orientation. My Print Was Printed With A 1Mm Nozzle, .45 Layer Height. Your Print May Come Out Nicer. Use M4X16 Screws To Mount The Relay To The Frame With T-Nuts, Sandwiching The Enclosure Between The Relay And The Rail. The Cover Is Held On With 2 M3X15Ish Screws. You Can Use Zip Ties To Secure The Wires Through The Loops For Additional Stress Relief.
Statistics
Likes
18
Downloads
0