Mounts for heatbed's insulation
Description
<H3>Supports For Heatbed'S Thermal Insulation Made From Cork Boards.</H3> <B>Warning: There Is An Error On The Pics, The Pcb Is Upside Down. The Copper Must Be On The Side Of The Cork.<I>(See The Picture Provided In The Notes/Custom Section, "Mount Assembled" For Use It In The Right Way)</I></B> *** <H3>V.1 And V1.1</H3> Removed. *** <H3>V.1.2</H3> <P>29-03-18</P> <B><U>What Is Needed:</B></U> <Ul> <Li> Print "Support Insul V1.2_Fixed.Stl" X 3 <Li> Print "Support Insul V1.2_Strain_Fixed.Stl" X 1 <Li> Print "Cr-10_Y-Axis_Wire_Restrain_Bracket_Cover.Stl" X 1 <Li> Cork Boards 6Mm X 2 (310Mm X 310Mm For Cr-10) <Li> Pcb Single Face X 1 (Same Size Than Cork Board For Cr-10, At Least 260Mm X 260Mm Min). <Li> M4 Brake Nuts X 4 (M4 Screw On Cr-10) <Li> Countersunk Flat Socket Head Screw M4X50Mm X 4 (Cr-10 Screw May Be Too Short) <Li> Washers Size Id: 5Mm Ed :9.8Mm </Ul> <H3>Remember: </H3> <Ul><Li>Follow Safe Work Procedures. <Li>Always Wear The Right Personal Protective Equipment And Clothing. <Li> Enjoy Your Self <Li>Don'T Forget To Tip Your Designers </Ul> <B><U>Warning</U></B>: Strain Relief Bracket Is Designed For A Creality Cr-10 Heatbed. Glass Plate Bed Holder For This Set Can Be Found <A Href="Https://Www.Thingiverse.Com/Thing:2844889">Here</A>
Statistics
Likes
48
Downloads
0