CPAP Hose Clip
Description
A Visitor Mentioned That They Were Looking For Something Like A Cpap Hose Clip To Guide The Hose Near Their Bed, So I Designed And Tested This. The Bore Is 20Mm, And The Two Parts Go Together With A Paperclip Bent Through The Hinges, And Clipped Short. For My Standard Hose I Found It Slide Through Smoothly With A Tiny Bit Of Clearance, So If You Want It To Be A Tighter Grip, Try Printing At 95% Scale, Or Packing A Bit Of Paper Or Tape Into The Bore. It Can Be Mounted With A Standard Size 8 Screw, Or Double Sided Sticky Foam. Updated 19-Jun-18_11-29 Added A Clip Version (02) For A More Convenient Solution. The Hose Firmly Clips In, But Can Still Slide Through Smoothly. A Rubber Band Can Also Be Used To Grip The Hose To Prevent Free Movement If You Wish. Added A Hook That Is 30° Off Horizontal And About 10Cm Long That Can Guide The Hose As Well As Store The Mask When Not In Use. I Have It Mounted To My Headboard For Convenience. Updated 29-Jun-18_16-17 Added A Better Hook That Doesn'T Let The Mask Slide Off Sideways, Even When The Cat Rubs On It.
Statistics
Likes
37
Downloads
0