Ender-2 / Cr-10 Filament Guide PTFE tube version (snug fit)

Description

I Needed Something To "Wider" The Angle Of The Filament From Spool To Extruder On My Ender 2. I Realized That A Piece Of Ptfe Tube Would Help A Lot... So I Decided To Remix This Thing. I Saw The Other Remix For Ptfe Tube, But This Was Not Snug Fit, So I Decided To Make My Own... I Used This Ptfe Tube: Https://Amzn.To/2Pwjqit <H2>Print Settings</H2> Infill: 100% Layer: 0,2Mm Support: Yes Raft: No Print-Time: Approx. 1H Used Filament: Nunus Petg: Https://Amzn.To/2Pruc4U I Used The Following Tape On My Cr-10: Http://Amzn.To/2Zxjjgu This Stuff Is Really Great, No Extra Glue Needed, 100% Sticky To The Printed Parts, Which Come Off Really Easily, Even Without Destroying The Tape. On My Ender-2 I Use A 1Mm Carbon Plate Coated With Kapton Tape: Http://Amzn.To/2Npggqi <H3>Extra Tip</H3> Another Very Hot Tip Is To Use Kapton Tape! Here You Get The Glossy Finish And Perfect Adhesion Like With The Blue Tape! Look At This: 200Mm Kapton Tape: Http://Amzn.To/2Npggqi Have Fun! (Amazon.De Affiliate Links)

Statistics

Category

Tags