Eachine Pro58 module cover for Flysight Falcon FG01 fpv goggles
Description
This Is A Cover For The Eachine Pro58 Diversity Module For The Flysight Fg01 Fpv Goggles. ### 20180407 - V4 - Increased The Size Of The Little "Tabs" That Hold The Cover In Place So That Now It Will Not Get Off Too Easily - Increased Hole Size For The Antennas, Making Installation Easier - I Printed With Pla At 0.1Mm Resolution With Supports On A Prusa Mk2 And The Result Is Great. Might Try With Abs / Petg Or Even Polycarbonate For Fun. - The 3D Model Is Not Perfect, Thus When Printing At 0.1Mm You Might See Minor Defects In The Walls, I Don'T Know How To Fix This So I Think I Won'T Bother. ### 20180331 - V2 - The Cover Fits Perfectly - The Antenna Holes Are Really Slightly Off But It Fits. I Might Need To Move Them 0.4Mm Right And Increase The Hole Diameter By 1Mm - The Hole For The Wheel Button Is A Bit Too Small, A Little Bit Hard To Use It Because The Way The Module Is Made Makes It Very Close To The Edge Of The Goggles. ### Print Instructions Print Face Down (You Need To Rotate The Model In Your Slicer) Use Automatic Supports
Statistics
Likes
15
Downloads
0