2x3x5
Description
A 2X3X5 Twisty Puzzle. The 2X3 And 2X5 Faces Can Turn 180 Degrees, While The 3X5 Faces Can Turn 90 Degrees. This Puzzle Can Shapeshift Considerably! To Make, Print Each Part By The Number Indicated On The Filename: * 1 Alignment * 2 Short Center * 4 Hidden Center * 1 Core (Not Recommended) * 4 Left Corner * 4 Right Corner * 4 Left Chiral Edge * 3 Right Chiral Edge * 4 Long Edge * 4 Outer Center * 4 Center Edge * 4 Small Hidden Edge * 3 Large Hidden Edge There Are Only 3 Large Hidden Edges And 3 Right Chiral Edges Because The Alignment Piece Combines One Of Each. It Is Highly Recommended To Use A Factory-Made Core Rather Than A 3D Printed One. You Can Buy One Here: Https://Thecubicle.Us/Qiyimfg-Core-P-8461.Html You Also Need 6 M3 Screws And 6 Springs. Four Screws Need To Be 20Mm And Two Need To Be 15Mm. You Can Buy The Screws Here: Https://Thecubicle.Us/Moyu-Weilong-Hardware-P-1666.Html If You Use These Screws, You Need To Sand Two Of Them Down A Bit So They Don'T Protrude Out Of The Centers. Stickers Are Standard 57Mm 3X3.
Statistics
Likes
41
Downloads
0