German RepRap NEO E3D V6 Mount with electrical connector
Description
Based On The Original Design By Kakadu I Recreated The Axis Mount For The Grr Neo V6 Hotend Upgrade Including Ideas From Hoich And Adding A Mounting For Electrical Connectors. This Version Should Fit Both Source Designs. Please, Find All The Other Parts At The Remix Sources. The Original Design Would Work Perfectly Without This Modification. I Just Really Like A Nice And Tidy Wire Routing. As A Side Effect The Hotend, Thermistor And Fans Can Be Changed Quite Easily. The Modified Version Is Meant To Be Used With Micro-Mate-N-Lok 2-Pin Connectors (1445022-2) And (1445049-2). Alternatively You Can Use The Panel Mount Version (1445048-2) And Cut The Retaining Clips As I Did. Don'T Forget To Order The Contacts. I Used (794610-1) And (1-794612-0). Though There Are Different Part Numbers For Other Wire Sizes. (Don'T Tell Anybody I Did In Fact Crimp The Contacts With A Small Set Of Combination Pliers As The Original Crimping Tool Is Quite Expensive. You May Also Try To Solder Them, If You Are The Kind Of Person Who Dares To Do So.) In Germany The Parts Are Available At Conrad.De Please, Feel Free To Adapt This Thing Or The Idea To Your Needs.
Statistics
Likes
12
Downloads
0