Anet A8 LCD Flush Mounting Frame
Description
This Is A Flush Mounting Frame/Cover For A Standard Anet A8 Lcd Screen For Custom Installs . ( Part Lcd2004) It Allows You To Mount The Lcd On A Flat Panel With The Only Hole Needed Is For The Ribbon Cable Access . This Saves A Lot Of Time Marking & Drilling All The Holes & Cutting & Filing The Square Lcd Panel Hole . There Are Spacers On Both Sides Of The Pcb To Hold Everything At The Right Height. Print 2 Of The Small Stepped Spacers To Hold The Pcb Board Inside The Cover . The Whole Assembly Attaches With 4 X 4G X 25Mm Long Screws Through The Cover , Pcb Board & Printed Spacers . If Your Mounting It To Conductive Plate , Put Some Insulation Behind The Header Pins In Case Of A Short . Update: There Is A Nice Backing Plate Designed By Truglodite To Mount The Whole Assembly On To. Its Available At Https://Www.Thingiverse.Com/Thing:2861929
Statistics
Likes
24
Downloads
0