_75247d50634da83d463c9e952c01fb4f7303a845.jpg)
Virhuck Antenna Mount Case (here on graupner mx-16)
Description
Material: Ninjaflex "Lava" Layer: 0.2Mm Support: Yes The Two Little "Pipes" Face To The Printbed, Add Some Support For The Large Tube.
Statistics
Likes
1
Downloads
0
Material: Ninjaflex "Lava" Layer: 0.2Mm Support: Yes The Two Little "Pipes" Face To The Printbed, Add Some Support For The Large Tube.
Likes
1
Downloads
0