308 Winchester Headspace Gauge
Description
Disclaimer: Reloading Cartridges Is A Dangerous Endeavour. All Reloading And Firing Of Reloaded Ammunition Is Done At Your Own Risk. Do Not Attempt To Reload Until You Have Read And Understood At Least One Printed Reloading Manual. Always Wear Safety Glasses When Reloading. Do Not Smoke While Reloading. Keep Primers And Powder Away From Heat And Open Flames. Keep Primers And Powder Where They Cannot Be Accessed By Children. Work Up Your Loads Following The Standard Procedures Described In Printed Load Manuals. To Repeat, All Reloading And Firing Of Reloaded Ammunition Is Done At Your Own Risk, The Author Of The "Thing" (308 Winchester Headspace Gauge, The Stl File, And All Contents Of The Webpage "Http://Www.Thingiverse.Com/Thing:2847925") Assume No Liability And No Responsibility For Death, Injuries, Or Damage Due To The Use Of Said "Thing". This Is A Headspace Gauge For The 308 Winchester. It Is Printed Out Of Pla And Sized Per The Saami Maximum Measurements. It Can Be Used To Quickly Go Through Brass And Determine Which Ones Do Not Meet The Standards. Do Not Rely On This As The Final Determination Because In Reloading Many Things Go Together In Order To Make That Decision. It'S Not A One Step And Done Process.
Statistics
Likes
13
Downloads
0