Wanhao Duplicator 6 - Dual 40mm Fan Mount and Ducts
Description
Note: Instructions For Assembly In The "Post-Pinting" Tab This Is A Dual 40Mm Fan Mount For The Wanhao Duplicator6 / Monoprice Ultimate. I Used Two Noctua Nf-A4X10 Flx Due To The High Build Quality And The Vibration Dampening Pads. Other 40Mm Fans May Not Fit Due To Dimentonal Differences And Cable Locations. But You Are Welcome To Try :D. You Do Not Lose Any Build Volume In Your Printer With This Mount Attached! Parts Required: 2X Noctua Nf-A4X10 Flx 8X M3 X12Mm Socket Head Screw 4X M3 X 6Mm Socket Head Screw 8X M3 Nut 1X A Big M3 Washer Of Sorts (May Also Be Printed) To Distribute Forces While Installing The M3 Nuts More Information On Assembling And Installing This Modification Can Be Found Under The Post-Printing Tab. Important: I'M Using The Micro Swiss Mk10 All Metal Hotend Conversion Kit With The Better Cooling Block. I Don'T Know If The Distance Between The Ducts And The Printbed On A Stock Printer Is Still Roughly The Same. If You Try It And The Distance Is Too Small, Let Me Know!!! There Are Two Versions Of The Main Mount Body. The Only Difference Is The Inlay For The Hot Surface Warning Sticker. If You Still Have It, Take The Opportunity, Add This Little Detail And Improve The Professionalism Of Your Printer. :D Fusion File: Https://A360.Co/2Cpnbtf
Statistics
Likes
120
Downloads
0