Anti-vibration mounting pin for Raspberry Pi 3 / 3+ Techstatic cooler fan
Description
These Anti-Vibration Mounting Pins Are A Great Replacements For The M2.5 Screws That Is Used To Attach The ~~25Mm~~ 30X30X7Mm Fan To The Raspberry Pi Techstatic Active Cooler. The Fan Is Already Very Silent, However If One Wants To Reduce The Noise And Vibrations To A Minimum, These Mounts Are Designed To Mechanically Decouple The Fan As Much As Possible From The Heat Sink. Mounting Is Straight Forward: Push The Pin Slightly Into The Threaded Hole Of The Heat Sink, Make Sure It Sits Straight. Twist Clockwise Until The Pin Sits Firmly Into Position. Repeat For All Four. For Detailed Instructions Please Visit Www.Techstatic.Se -> Support
Statistics
Likes
8
Downloads
0