Photo Base Plate
Description
This Is A Small Baseplate For Use With Those Mini Camera Ball Heads <A Href="Https://Amzn.To/2Q1Lkn8">Like This One</A>. Very Simple Design. 100Mm Base, 20Mm Rise, Recessed Hole So The Screw Head Isn'T Sticking Out. Depth Of The Hole Is Sized So That A 1/4-20 Screw 1/2" Long Will Screw Into The Ball Head Just Perfectly. This Plate Comes In Handy For A Lot Of Other Things As Well. I Use One For Backlights In The Field Using A Speedlight With Pocket Wizards. If You Decide To Do This You Can Either Buy The Really Expensive Mount With The <A Href="Https://Amzn.To/2Q1M9Mn">Pre-Made Connector</A>, Or You Can Buy <A Href="Https://Amzn.To/2H4Zxwu">One Of These Cheaper Mounts</A>, Cut The End Off And Solder On Your Own 1/8" Plug. This Plate Also Comes In Handy For Low-To-The-Ground Or Tabletop Gopro/Point-And-Shoot Applications. A Bit Small For A Dslr But Would Probably Work For Short Periods. Easy Print. Needs A Little Support For The Recessed Hole But It Comes Out Clean.
Statistics
Likes
1
Downloads
0