HyperCube EVO E3D v6 Hotend Mount + Heatsink Shroud + Fang Combo
Description
This Is A Remix Of My V6 Hotend Fan Shroud And 5015 + 40 Fang Combo Https://Www.Thingiverse.Com/Thing:2449326 That I Made Originally For My I3 Printer. It'S Modified To Fit My Hypercube Evo Printer. I'Ve Modified The Standard Hevo Hotend Mount Plate And Added A Hotend Mount For The E3D V6 Hotend And A Cable Mount With Ziptie Above. The Hotend Clamp Allows For The Heatsink Shroud To Be Screwed Down With A Computer Harddrive Mounting Screw To Prevent Wobbling. The Fang Is Modified To Fit The Radial Fan At 90 Degrees Along The X Axis So It Fits Within The Frame. My Frame Comes From The Flsun Cube Printer So I'M Not Completely Sure If It Will Fit A Standard Hevo Frame But Here Is The Clearance Info You Would Need To Make Sure It Will Not Hit Anything. The Mounts And Fang Are As Wide As The Standard Hevo X Carriage And The Front Clearance Needed Is About 80Mm From The X Rods. If Your Frame Has That Clearance, This Should Fit Fine. I'Ve Also Included The Blend File For The Fang If You Want To Make Changes.
Statistics
Likes
38
Downloads
0