Hot Wheel Track 180 deg Turn, 30 deg Bank w/ Joiner (Redesign)

Description

This 180 Degree Turn With A 30 Degree Bank Hot Wheel Track With Joiner Has The Ability To Be Mounted Via A M5 X 6.7Mm Heat Set Brass Insert From Mcmaster. Its Input / Output Are Level So There Is No Drop In This Design. Step And Fusion 360 Files Are Included If You Want To Modify The Design. I Have Also Included A Split Model So That Smaller Platform Printers Can Print The Part In 2 Pieces. The Split Design Can Be Joined By Using Two Mcmaster M3 Heat Set Brass Inserts And 2 M3X20 Cap Screws. Updates: ------------ 20190426: Posted An Updated Design Where The Ends Are Solid And Similar To The 45'S And 90'S Curves.

Statistics

Category

Tags