Gammy's remix of elinanz's Easter egg
Description
Gammy'S Remix Of Elinanz'S Easter Egg Chick-Bunny Easter Decoration. This Version Print-Friendly. Improvements: - The Model Has Been Split Into Three Individual Parts For Easy Printing - The Nose Geometry Has Been Modified To Make The Model Manifold (Properly Connected To And A Part Of The Body) - The Underside Of The Feet Have Been Flattened - The Legs Have Been Thickened, And An Insert Portion Has Been Added, To Slot Into The Bottom Portion Of The Model - The Bottom Portion Now Has Two Holes To Insert The Feet Into Notes: - The Bottom Part Holes, Where The Feet Are To Be Inserted, Have Been Constraint-Adjusted To Fit. There Should Be No Need To Scale Them Further. - Blender And Stl Files Are Included, As Well As Elinanz' Original Stl. - I Used Tamiya Cement To Attach The Bottom And Top Portions. I Needed No Adhesive Or Solvent To Attach The Legs; They'Re Firm-Fit - I Suggest Painting This Model, Especially To Hide The Top/Bottom Seam - Successfully Printed Using - Part 1 (Legs) - Hips (240C, 110C Hotbed) - 1.0Mm Walls ("Perimeter") - 0.15Mm Layer Height - 10% Infill - No Supports - Part 2 (Bottom) - Hips (240C, 110C Hotbed) - 1.0Mm Walls ("Perimeter") - 0.2Mm Layer Height - 10% Infill - Supports Touching Buildplate (For The Tail) - Part 3 (Top) - Hips (240C, 110C Hotbed) - 1.0Mm Walls ("Perimeter") - 0.2Mm Layer Height - 10% Infill - Supports Everywhere (For The Right Ear)
Statistics
Likes
1
Downloads
0