X Belt holder self locking
Description
5Th April Update: The Block Was 10 Times Too Big. I Scaled It Down And Uploaded As V3. After I Printed A New X-Carriage Https://Www.Thingiverse.Com/Thing:2469435 For My Anet A8 I Realized That The Included X-Belt Holder By Itesdahl Was To Big For My Gt2 Belt. When Tensioning The Belt It Always Slipped A Tooth. I Found The X-Belt Holder From C0Ryp1 Https://Www.Thingiverse.Com/Thing:2795893 But That Holder Didn'T Have The Right Holes For The X-Carriage. I Used His Locks But Designed Quickly A New Block With The 2 Holes Having The Right Size For Itesdahls X-Carriage. They Are 50Mm Apart And 4Mm In Diameter. To Fix The Holder To The Carriage I Used M3 Screws With Washers And Nuts. I Didn'T Use A Spring As I Think It Is Not Necessary. Make Sure To Have A Belt Tensioner Installed Before You Use This Holder!
Statistics
Likes
20
Downloads
0