Clean Dirty (Magnetic Lock Option)

Description

Sliding Clean/Dirty Indicator. Thick: 0.8Ish Inches Thick Thin: 0.4Ish Inches Thick Each Set Is Made Up Of 3 Files ______________________________________ Files For Thick Version (No Magnetic Lock): Cd_Body.Stl Cd_Slider.Stl Cd_Cap.Stl Magnets Used For Thick: Https://Www.Amazon.Com/Count-Multi-Color-Magnetic-Whiteboard-Magnets/Dp/B01Lyd051P/Ref=Sr_1_88?Ie=Utf8&Qid=1523024051&Sr=8-88&Keywords=Magnets Assembly (Thick): 1. Remove All Supports 2. Fit The 'Slider' Into The Groove On The 'Body' 3. Apply 2-4 Drops Of Super Glue Around The Base Of The Posts On The 'Cap' 4. Carefully Fit The 'Cap' Posts Into The Holes On The 'Body' And Let The Glue Set Note: Some Glue May Seep Into The 'Body' Groove Keep Slider Away From That Side And Glue Free While It Sets 5. Apply Superglue To The Magnet And Insert The Magnet, Glue Side First, Into The Magnet Hole In The Back Of The 'Body'. Let Glue Set _____________________________________ Files For Thin Version (Magnetic Lock) Cd Body Thin.Stl Cd Slider Thin.Stl Cd Cap Thin.Stl Magnets Used For Thin Option: Https://Www.Amazon.Com/Refrigerator-Jack-Chloe-Stainless-Approximately/Dp/B01Mfhnhnw/Ref=Pd_Bxgy_79_2?_Encoding=Utf8&Pd_Rd_I=B01Mfhnhnw&Pd_Rd_R=Bnadggy0Q04F1562Dma4&Pd_Rd_W=Ajen0&Pd_Rd_Wg=Mjagn&Psc=1&Refrid=Bnadggy0Q04F1562Dma4 Assembly (Thin): 1. Remove All Supports 2. Choose A Magnetic Config. From The Pictures (There Are Only Two) 3. Orient The Magnet Into The 'Slider' According To The Config. Chosen (Do Not Glue Magnet Into Slider) 4. Fit The 'Slider' Into The Groove On The 'Body' 5. Orient The Magnets Into The 'Body' According To The Config. Chosen 6. Test The Magnets By Moving The 'Slider' Back And Forth. The Slider Should Be Drawn To The Sides And Repelled From The Middle. Magnets In The 'Body' May Need To Be Flipped To Achieve This. (Glue These Magnets In If Needed) 7. Apply 2-4 Drops Of Super Glue Around The Base Of The Posts On The 'Cap' 8. Carefully Fit The 'Cap' Posts Into The Holes On The 'Body' And Let The Glue Set Note: Some Glue May Seep Into The 'Body' Groove Keep Slider Away From That Side And Glue Free While It Sets

Statistics

Category

Tags