Bird Temple

Description

For A Newer And Improved Version On My Own Website, Go To Https://Www.Designuitinspiratie.Nl/Vogel-Tempel-2/ ----------------------------------------------------------------------------------------------------------------------- This Is A Bird Feeder For Small Birds. Bigger Birds Simply Can Not Get In :-) .You Can Put Food For Them In The Green Feeder-Dish In The Middle. The Feeder Has A Hole In The Middle To Let Water Out. Also The Feeder Can Be Removed For Cleaning. In Use, That Will Be Necessary :-) The Peaces Fit Together Like A Puzzle And They Are Glued. Later I Painted It With Insulating Primer To Get Rid Of The “Printer Tool Marks” You Can See On The Pictures. I Have No Reason For The Colors Of Pla I Have Chosen Other Than That I Had Those. The 2 Different Colors Are Due The Fact I Used 2 Printers To Save Time. I Printed This In 0,2Mm Resolution With A 0,4Mm Nozzle. The Temporary Support Peaces Are Printed With Only One Wall Count And One Top And Bottom Layer. Infill Of These Support Peaces Are 10%. This Is To Save Material :-). The Other Peaces Are Printed With 3 Layers For The Wall , Top And Bottom . Infill Between 20-25%. The Roof Peaces Are Printed With Support Generated By Cura. The Mount Or Ring At The Top Is Fastened With A M3X40Mm Bolt And Nut. At First I Designed This “Mount” In 3 Peaces, But Later Changed It To 2 Peaces, Due To Other Changes I Made. To Make This Part Strong Enough I Used Pet-G Carbon To Print This Peace. This Material Looks Very Nice, But It Turns A Brass Nozzle Into Garbage After A Few Prints :-). For This A Hardened Steel Nozzle Is Better, But Such A Nozzle Is Expensive ( €30,- Where I Live) In The “Total Assembly.Stl' The Whole Model Is Assembled So You Can Check Where All The Parts Should Go March 28-2019 Added Parts : “Roof Total Ass.Stl” & “Step 1.Stl – Step 4.Stl” If You Have Questions Or Do You Think I Have Forgotten Something , Feel Free To Ask :-)

Statistics

Category

Tags