Fire HD 10 Wall Mount
Description
Wall Mount For The Kindle Fire Hd 10. Ideal For You Actiontiles Fans! Three Versions Are Available. 45° Corners, Square Corners And Round Corners. 45° Is My Favourite. Round Corners Will Not Print Well Vertically. Prints In Two Sections, A Left And A Right To Allow The Kindle Fire To Slide In And Be Bolted Together, It Then Hangs On Screws In The Wall. 5Mm Back Thickness Helps Get A Regular Usb Power Cable To The Kindle, Either From A Wall Outlet Behind Or From Trunking From Above Or Below. Top And Bottom "Cutouts" Are Provided If You Wish To Use Mini-Trunking To Bring The Usb Power Cable To The Kindle Fire. Otherwise These Can Be Left In Place (If You Prefer A Cleaner Cutout For Trunking Modify Includetrunkingcutout In The Openscad File). Print Vertically (See Screen Shots). You Can Print Horizontally But It Adds A Lot Of Supports And Is Prone To Warping. The One In The Photos Was Printed Horizontally (To Test The Supports) So It'S Possible, But You Can See It Warped Slightly - Even On Buildtak! :-( Depending On Your Printer It Might Be A Tight Fit. Adjust Firewidth, Fireheight, Firethickness In The Openscad File If You Need To Open It Out A Bit More - Print The Right Hand Section First To Test The Fit - It'S Quicker. If Your Printer Doesn'T Go As High As 200Mm Then Adjust Slicepoint In The File To Reduce , But It Has To Be More Than 50% Of The Model To Allow For The Two Halves To Be Screwed Together. The Two Half'S Are Joined With M3 Countersunk Machine Screws (12Mm+). These Thread Into The Plastic So Don'T Over Tighten. The Rear Wall Mounts Also Help Keep The Frame Together. Select Your Usb Cable Carefully. Use A Right Angle Micro B Connector. If It'S Too Tight Increase The Size Of The Frame (Boxwidth) Or Find A Slightly Smaller One. The Round Right Angle Ones Work Well, Some Right Angle Ones Are A Little Too Big. See Photos For How To Feed The Cable When Putting The Two Halves Together. Latest Version Will Be On Github: Https://Github.Com/Bookswapsteve/3Dprintablethings/Tree/Master/Kindlefiremounts/Fire%20Hd%2010 Edit: Apparently They'Re Not Called Kindle Fire'S Any More - Fixed The Title :-)
Statistics
Likes
126
Downloads
0