Motorbike fork oil seal install tool
Description
I Designed This Tool To Help Me Fitting The Fork Oil Seals In My Motorbike. Only Useful For Regular (Non Inverted) Forks, Unless You Cut It Into Two Halves. I Designed It To Be Used In 41Mm Fork. I Set A 42Mm Inner Diameter, And After Printing, I Got Approx. 41.5Mm, So It Slides Perfectly. If You Need Different Size, Just Scale. I Tested It And It Is Strong Enough To Support 80Kg, With 25% Infill. I Haven'T Tested If It Works (I'M Waiting For New Seals, But I'M Pretty Sure It Will). Update From The Future: I Used It And It Worked... But It Finished The Job Almost Destroyed. I Recommend Using A Higher Infill. I Used 25% And It Wasn'T Enough. Maybe 50-60% Will Be Perfect.
Statistics
Likes
11
Downloads
0