1/4" NPT Household Water Nozzle
Description
This Spray Nozzle Produces Approximately An 85 Degree Spray Pattern At Well/City Pressures. It Is Best Printed With The 1/4" Npt Threaded Portion At The Top While The Nozzle End Would Be Directly On The Build Plate. Prints With No Supports At 100Micron And 50Micron. Should Be Made From Nylon Filament For Its Strength And Water Properties. I Uploaded Two Stl Files Which Are Different Size Orifices, Giving A Little More Or Less Water. Enjoy!
Statistics
Likes
35
Downloads
0