Cosmic Encounter Game Board
Description
Customizable Game Board For Cosmic Encounter. #### Changelog **2018-05-12** Added Destiny Chips And Ship Tokens. **2018-04-15** Original Version. #### System Hexes You Will Need To Print Six System Hexes, Each In A Different Color. If You Have The More Cosmic Expansion, You May Opt To Use A Model With One Or Two Cutouts For Moons. ##### Full System Hex If You Would Like Hexes In A Single Color, Use One Of The Following Models: * `System_0_Moon.Stl` * `System_1_Moon.Stl` * `System_2_Moon.Stl` ##### Split System Hex For A More Traditional Look, You May Print Each System Hex In Two Pieces. Print The Base Of The Hex In Color, Using One Of The Split Bottom Models: * `System_0_Moon_Split_Bottom.Stl` * `System_1_Moon_Split_Bottom.Stl` * `System_2_Moon_Split_Bottom.Stl` Then Print The Top Of The Hex In Black, Using The Matching Split Top Model: * `System_0_Moon_Split_Top.Stl` * `System_1_Moon_Split_Top.Stl` * `System_2_Moon_Split_Top.Stl` Then Superglue The Pieces Together. This Will Give You A System Hex That Is Black On Top But Has Colored Planet Cutouts. (Alternatively, You May Try Using The One-Piece Models And Pausing The Print To Swap Filament At The Appropriate Layer, But I Have Not Had Much Luck With This Technique.) #### Void Print One `Void.Stl` In Black. If You Fancy A Dual-Color Void Hex, You May Instead Use `Void_Split_Bottom.Stl` And `Void_Split_Top.Stl` As Described Above. #### Destiny Cone You Will Need To Print Two Destiny Cones. I Recommend Printing `Destiny_Cone_One_Sided.Stl` Once In Black And Once In White Or Light Gray. You May Use Them As Two Separate Cones, Or Glue Them Together Back-To-Back For A More Traditional "Flip" Approach. Alternatively, If You'D Like A Single Print, You May Use `Destiny_Code_Two_Sided.Stl` And Perform A Filament Swap Mid-Print. #### Destiny Chips Rather Than Using A Destiny Card To Select The Target System, You May Print Destiny Chips That Can Be Selected From A Bag. You'Ll Need Four Chips For Each System Color -- Three To Represent A Normal Attack And One To Represent An Inverse Attack. Each Chip Is Made From Two Parts, An Inside And An Outside, Which Can Be Press-Fit Together With No Glue. You Will Need: * Print Four `Chip_Outside.Stl` In Each Of Your Six System Colors. * Print 18 `Chip_Inside.Stl` In White Or Light Gray. * Print Six `Chip_Inside.Stl` In Black. You Will Also Need A Wild, And A Wild Inverse Chip. These Are Can Be Done With A Single Solid Color: * Print One `Chip.Stl` In White Or Light Gray. * Print One `Chip.Stl` In Black. If You'D Like To Use Any Of The Additional Destiny Cards Included With More Cosmic Encounter, You Can Print Some `Clip.Stl` In A Separate Color, And Then Draw From The Deck When One Of These Is Selected. #### Ship Tokens You May Print Ship Tokens To Match Your System Colors. For Each System Color, Print 20 `Ship.Stl`. I Prefer To Print These In A Higher Resolution (100 Micron) Than The Other Pieces. #### Disclaimer This Was Designed Specifically For The Mayfair Edition. It Will Likely Work For Other Editions As Well, But I Am Not Personally Familiar With Them. Please Leave Me A Comment If You Print This And Use It For Another Edition.
Statistics
Likes
16
Downloads
0