iPad Mic/Music Stand Holder
Description
Ipad Holder For Gen 5 (2017). Will Work Both Vertically And Horizontally, And Will Fit Most Mic Stands And Music Stands. There Are A Variety Of Different Sized Arms And Swivels To Fit It To Most Needs. All Are Interchangeable So You Can Print As Many Parts And Combinations As Needed. The Photos Do Not Show All Parts In Use. I Used Form Futura Titanx Abs. The Minimum Parts That Need To Be Printed Are: Hub Left Arm Right Arm Upper Arm Long Shaft A Or 2 Mini Swivel Shafts Clamp Main Body (Use A Pause Command To Place The Barrel Nut/Cross Dowel) Clamp Hinge Side Clamp Lock Barrel 5 Star Knobs All The Other Parts Can Be Printed Optionally, For Any Unique Situation. The Hinge Which Couples The Clamp Main Body And The Clamp Hinge Side Is A Short Piece Of Coat Hanger Wire, And The Clamp Swivels In A Barrel Nut, Which I Printed In Place Using A Pause Command. Hardware: T-Bolts (2) To Connect Left And Right Arms Arms And Upper Arm 1-1/2" Bolts For Shaft And Swivel Connections 2-1/2" Bolt For Clamp 1 Barrel Nut / Cross Dowel For Clamp Swivel Update: I Have Included 5 New Stl Files; A New Flat Mount, Medium Shaft A, Medium Shaft B Left Arm Long, And Right Arm Long. I Also Oriented All Parts For Correct Printing.
Statistics
Likes
360
Downloads
0