Metal Delta 30mm to 40mm fan adapter
Description
I Designed This To Fit In The Small Space Between The Ball Studs On The Metal Delta. It Is 5Mm High And When Used With A 40X40X10 Fan Shrinks The Print Bed Radius By 10Mm. The Adapters Should Work With Both Button And Cap Screws. I Printed 5. One Each To Replace The 3 Fans On The Effector And 2 For The Hotend. I Use The Noctua Nf-A4X10 Flx Fans. M3X6Mm For The Adapter To Effector. M3X12Mm For Fan To Adapter
Statistics
Likes
2
Downloads
0