Cantilever bed MGN12 Z axis mounting set.
Description
I'Ve Learned The Mgn/Lineal Rails Set On Z Is Stiffer And Definatelly An Improvement Over The Lineal Lmxuu Bearings And Smooth Rods... But Since These 2 Were Not In A Single Piece There Was Some Rocking On The X Axis Direction Of The Xy Plane (Printing Bed)... Having The Both Mgn12H Joined In The Center Made The Bed Very Stable... There Is Virtually No Vibrations This Is For Original Tech2C Hypercube (200 Mm Printing Cube)
Statistics
Likes
23
Downloads
0