Fan Duct for Geeetech Acrylic Prusa I3 X
Description
Yet Another Fan Duct For The Diy Printer Geeetech Prusa I3 X Acrylic Version. None Of The Things I Found Here Fitted My Printer, So I Designed My Own. Geeetech Seems To Change Their Printers Without Updating The Model Number. I Bought Mine In October 2017. The Distance Of The Nozzle To The Upper Edge Of The Extruder Carriage Is ~36Mm, The Distance Between The Front Face Of The Carriage And The Nozzel Center Is ~33Mm. Print The Three Parts And Then Glue Them Together. Since This Part Will Be Close To The Hot Parts Of The Printer, I Used Abs To Be On The Safe Side. The Design And Split-Print Approach Are Inspired By Luca Benedetto'S Fan Duct (Https://Www.Thingiverse.Com/Thing:2453391), Which Unfortunately Didn'T Fit My Printer. I Use This Fan: Https://Www.Amazon.De/Dp/B06Xzr6Vqv/ Since It Has The Wrong Connector I Use These Cables To Connect It To The Board Https://Www.Amazon.De/Gp/Product/B01Du9Oy40 (Not Necessary, But I Use The Male Connector Of This Set To Connect The Above Cable And The Fan Https://Www.Amazon.De/Gp/Product/B01Du9P21O)
Statistics
Likes
9
Downloads
0