Powersupply Shield
Description
Safety Enclosure To Protect You From Touching Power-Switch Or Power-Inlet Connection Of Your Ctc I3 Diy Printer. Print The Design, Remove Upper Screw Of Power Inlet And Place The Enclosure As Shown In The Pictures. Mark The Fix Point With A Pencil Through The Hole Of The Previously Removed Screw And Drill A 3 Mm Hole At The Marked Place Of Your Print. Fix The Shield With Screw And Washer By Replacing The Formerly Removed Upper Screw Of The Power Inlet And You Are Done.
Statistics
Likes
1
Downloads
0