6.5 Inch Subwoofer Ported Enclosure
Description
Note: Update 4/14/2019: Added A 2Mm Gasket To Be Printed With Tpu 100% Infill So That Silicone Can Be Avoided For Making The Enclosure Air-Tight. Insert M4 Nuts Into Top Of Enclosure At Around Z Axis Layer Height Of 700 & 710 If Printing With A Line Thickness Of 0.3Mm Per Layer, After The Hex Nut Holes Have Been Printed. (They Are 3Mm Tall). I Paused The Print To Embed These Nuts For Easy Assembly And To Avoid Threading Screws Into The Plastic. You Can Edit The Gcode File To Insert A Pause (M600) Command By Searching For ";Layer:700", Have 1 And 1/2 Spools Of Pla On Hand For This Print! (2.2Kg). Print Time Is About 6.5 Days With A Resolution Of 0.25Mm Or About 4 Days @ 0.3Mm.
Statistics
Likes
77
Downloads
0