Hantu 5" - A Better Antenna Extension Mount 45°
Description
This Is A Better Extension Mount For The Hantu Frame. It Has Groves Cut In The Back That Allow It To Hold Both Hex Shaped Extensions And Extensions With The Flange Pieces Coming Out Of The Sides. The Mount Is Set To 45 Degrees. The Antenna Should Be Able To Point Out The Back Pointing Up Or Down. You Should Be Able To Print It In The Direction It Is Sitting (With Spacer Holes At 45 Degrees). The Hantu Frame Is Available Here: Https://Www.Banggood.Com/Hantu-5-Inch-210Mm-Carbon-Fiber-Frame-Kit-4Mm-Arm-With-3D-Printed-Parts-For-Rc-Fpv-Racing-Drone-P-1262946.Html?P=6Z050013977120130325 Hantu Canopy: Https://Www.Thingiverse.Com/Thing:2844784 Hantu Camera Mount & Antenna Mount: Https://Www.Thingiverse.Com/Thing:2816953 Hantu Axii Antenna Mount: Https://Www.Thingiverse.Com/Thing:2849615 Hantu Frame Review Video: Https://Www.Youtube.Com/Watch?V=C9Hy4Fdajvu As A Side Note, The Hantu Frame Is A Clone Of The Mode 2 Ghost. It Isn'T An Exact Copy So Most 3D Printed Parts Are Not Interchangeable.
Statistics
Likes
10
Downloads
0