Hand drill for drill bit with hex shank
Description
Edited! Hand Drill Made With Tinkercad, Copy Modify And Share :) : Https://Www.Tinkercad.Com/Things/Fjrzffy4L32-Hand-Drill The Size Of The Hex Shank Here Is 6.5X7.5Mm , If You Need To Modify The Size Of The Hex Shank, Ungroup The Design And Change The Size Of The Polygon, Adjust The Height Of The Polygon If You Need A Deeper Hole. After Editing, Remember To Select All When You Finnish The Design, Align Centers Then Group All. After Printing This Tool, The Hole Must Be Cleaned From The Supports, And You Will Need To Chamfer The Edges To Allow The Shank To Fit. The Shank Will Be Hard To Get It Inside The Hole For The First Use, Insert The Drill Bit In A Piece Of Wood And Carefully Press The Shank In The Printed Hand Tool, Put The Shank In And Out Many Times(You May Need A Tool To Take The Shank Out), Untill It Makes It Place And Become Easy To Remove. This Design Don'T Need A Magnet To Keep The Shank. Edit: I Added A Picture Of The Second Version Of This Tool, I Didn'T Printed This Version, I Just Wanted To See How It Looks To Add More Possibilities To The First Design. The Second Tool Is Like The First, But It Allow You To Store The Bit Inside The Hand Tool. The Third Can Store One From The Top And One In Use, So You Can Have Two Bits In One. The Hole Size For The Bit I Made Is 5Mm For The Biggest One From The Set I Have, To Allow Two Of Your Choice Which Are From 1.5 To 5Mm To Be Stored Inside. You Can Check It Out Here: Https://Www.Tinkercad.Com/Things/L9Bjlk66X0L-Hand-Drill-For-Drill-Bit-With-Hex-Shankv2#/ I Would Be Glad To See It Useful For Someone! Please Share Your Pictures And Modifications To Give All Of Us Something Useful. Inspired By Parametric Bit Driver (Hex 2Mm To 10Mm) From: Https://Www.Thingiverse.Com/Thing:2765545
Statistics
Likes
10
Downloads
0